Anti-Flux
This flux is used to prohibit solder from flowing into unwanted areas. Available in 1 and 4 ounce sizes.
• Anti-Flux, 1 oz.
$3.75
• Anti-Flux, 4 oz.
$6.95
|
|
|
Brass Wire Wheels
For descaling of metal parts. Use with Foredom or Dremel handpieces.
• Brass Wire Wheel 3/4 inch
$2.10
• Brass Wire Wheel 1 inch
$2.10
|
|
|
|
Burnishing Soap
The ideal additive to provide a burnished look to finished pieces. The soap works by providing lubrication and protection against rust and tarnish formation. Sold in powder form and used by mixing 4 oz. of soap per gallon of water. Can be used periodically to flow thru systems. Available in 1, 5 and 90 pound packages.
• Burnishing Soap, 1 lb.
$4.50
• Burnishing Soap, 5 lbs.
$17.95
• Burnishing Soap, 90 lbs.
$300.00
|
|
|
Dapping Punch Sets
Used in metalsmithing for forming shapes and curves. Normally used with dapping dies and blocks. Finely finished points give clean results.
• Dapping Punch Set, 24 pc.
$41.80
|
Deburring Powder
A metal cleaning compound when mixed with water will keep the deburring media clean and active. This helps to increase the life of the media to provide the maximum effect during the deburring operation. This powder can also be used to inhibit rust formation when deburring steel parts. Easy to use (by dissolving 4 ounces per gallon of water) or can be added directly to the load. Available in 1, 5 and 100 pound packages.
• Deburring Powder, 1 lb.
$3.23
• Deburring Powder, 5 lbs.
$12.01
• Deburring Powder, 100 lbs.
$228.00
|
|
|
|
|
|
Felt Discs
Great For Polishing With Oxide Polishing Agents. These hard felt discs are just the thing when undercutting is not a problem. Especially recommended for glass, agate and opal.
• Felt Discs, 6 inch dia.
$8.71
• Felt Discs, 8 inch dia.
$12.67
|
Felt Wool Buffs
These buff pads are made from the highest grade of wool felt, carefully compressed and formed to provide a uniform texture, hardness and shape.
• Felt Buff, 2.5 inch
$3.56
• Felt Buff, 4 inch
$11.35
• Felt Buff, 6 inch
$38.00
|
|
|
|
Hard Knife Edge Felt Buffs
Available in hard texture these solid felt wheels are used to polish those hard to reach joint areas. The small size permits use on flexible shaft machines. Use with screwed mandrel.
• Hard Knife Felt Buff 1/2 x 1/8
$0.85
• Hard Knife Felt Buff 5/8 x 1/8
$0.95
|
|
Jewelers Saw Frames
These high quality, German made saw frames are available in three depths 2 - 1/2", 3" and 4". Each frame can accommodate blades from 3 to 6 - 1/2" long and the correct blade tension is easily achieved with the threaded, adjustment device. The blade angle can be adjusted to permit cutting in any direction. Made from high quality steel and equipped with a wooden handle for comfortable gripping. Use with diamond wires (Standard or Barbed) for cutting intricate shapes in glass or rock slabs.
• Jewelers Saw Frame, 2.5 inch
$12.10
• Jewelers Saw Frame, 3 inch
$12.83
• Jewelers Saw Frame, 5 inch
$14.49
|
Little Torches
This torch is quite simply the best small oxy-acetylene torch on the market today. The Little Torch is a precision engineered, highly versatile instrument capable of doing seemingly impossible tasks with ease. It produces a perfectly controlled, completely stable flame with temperatures up to 6300 degrees F, that’s hot enough to solder, braze or weld gold and silver with accuracy and detail. |
• Little Torch Kit
$129.20
• Little Torch Gas Regulators
$92.13
• Little Torch One Tip Kit
$194.00
|
|
Muslin Buffs
These coarse, unbleached muslin buffs are used with abrasives for cutting and preparing curved metal surfaces for a fine, smooth finish. Available in 3, 4 and 6 inch diameters.
• Muslin Buff 3 in.
$2.13
• Muslin Buff 4 in.
$2.80
• Muslin Buff 6 in.
$6.17
|
|
|
|
Ponted Felt Buffing Cones
Pointed Felt Cones - Hard. Use with Foredom or Dremel handpieces.
• Felt Cone Buff, 1x1/2
$1.52
|
|
|
Rawhide Mallets
Used for forming or flattening thin metal forms. Heads are heavily shellacked to prevent marring of the work pieces. Available in 3 head sizes; Size 0-1" D x 2 1/8" L, Size 1-1 1/4 " D x 2 3/4 " L, and Size 2- 1 1/2" D x 3" L.
• Mallet, Rawhide #0
$12.83
• Mallet, Rawhide #1
$14.73
• Mallet, Rawhide #2
$17.10
|
|
|
|
|
|
|
|
|
|
|
Steel Wire Wheels
For Descaling. Available in 3/4" and 1" diameters. Use with Foredom or Dremel handpieces.
• Steel Wire Wheel 3/4 in.
$1.99
• Steel Wire Wheel 1 in.
$1.85
|
Tarnish Remover
INSTA- CLEAN Tarnish Remover. A dip or wipe-on tarnish remover and cleaner for gold (plated or filled), silver, copper, brass, coins and flatware.
• Insta-Clean, 4 oz.
$3.85
• Insta-Clean, 8 oz.
$5.25
|
|
|
|
Zam Polishing Compounds
An excellent polishing agent for chromium, stainless steel, nickel, silver and aluminum. This crocus base, white compound imparts a good color to silver and aluminum. Also great for polishing softer gemstones. Available in 4 oz. and 1 lb. containers.
• Zam Polishing Compound - 1/4 lb.
$3.65
• Zam Polishing Compound - 1 lb.
$7.76
|
![[Checkout]](http://www.amlap.com/alw/media/view_cart.gif)
